FRP Pressure Tank

•    100% non-metallic construction
•    One piece seamless molded vessel with no weld or joints.
•    About 1/3 the weight of steel tanks and can be handled easily
•    Available in standard
•    Polyester or chemical resistant Vinylester construction depending on your needs.
•    Optional custom openings located as per your specifications.
•    Easy to handle and install.

FRP vessels are used mainly for residential and small commercial applications like:
•    Softener
•    Filtration

Material : Polyester, Vinylester

Operating Parameters
Maximum Operating Pressure : 150 psi
Maximum Operating Temperature : 120° F Polyester, 150° F Vinylester

Design Parameters
Safety factor: 4:1 (Minimum burst L1 at 600 psi)
Cycle test: 250,000 cycles without leakage

Design parameters – NSF
Safety factor: 4:1 (Minimum burst at 600 psi)
Cycle test: 100,000 cycles without leakage

Specifications

Diameter (Inches)	Top	Buttom	Sidewall	Dome
6	2 1/2" - 8 NPSM	1" or 2 1/2"	3/4"	3/4"
7	2 1/2" - 8 NPSM	1" or 2 1/2"	3/4"	3/4"
8	2 1/2" - 8 NPSM	1" or 2 1/2"	3/4" or 1"	3/4"
9	2 1/2" - 8 NPSM	1" or 2 1/2"	3/4" or 1"	1 1/4"
10	2 1/2" - 8 NPSM or 4" - 8 UN	1", 2 1/2" or 4"	3/4" or 1"	1 1/4"
12	2 1/2" - 8 NPSM or 4" - 8 UN	2 1/2" or 4"	3/4" or 1"	1 1/4"
13	2 1/2" - 8 NPSM or 4" - 8 UN	2 1/2" or 4"	3/4" or 1"	1 1/4"
14	2 1/2" - 8 NPSM or 4" - 8 UN	4" or 6"	3/4" - 1 1/2"	1 1/4"
16	2 1/2" - 8 NPSM or 6" - 8 UN	4" or 6"	1", 1 1/2" or 2"	1 1/4"